Every effort has been made to ensure
that the advice and instructions given on this website
are accurate and will enable you to do the job safely
and successfully. However they are only guidelines and
we recommend you seek expert advice in the event of
difficulty.
Sometimes
it can be difficult to fit everything in to your garage
and this project makes use of the storage space beneath
the roof which can be easily used to store things like
ladders and lengths of timber using a rope and pulley
system.
What You Will
Need
One single wheel screw pulley
One double wheel screw pulley
One galvanized 4 inch cleat hook
A length of rope
What to Do
A.
Screw both pulleys into the underside
of the roof joists with the double pulley nearest
to your wall or fixing point.
B.
Attach the cleat hook to the garage wall below
the double pulley. Feed the two cut ends of the rope
over the double pulley and then feed one cut end
over the single pulley too.
C.
Tie the cut ends to whatever it is you are hanging.
D.
Pull the other end of the rope loop down to raise
the load and tie it to the
cleat hook.
To make this project even easier we
have introduced a range of ‘Project Packs’
that come complete with all the materials you need and
easy to follow instructions.
You can find our products in most DIY outlets but should
you have any difficulty obtaining any products
please ring our Service Line on 0121
502 0055 for details of
your local stockist.
